Scissor Lift
por Aedan Bingham en MyMiniFactory
Versatile scissor lift with approximately 300mm or 1ft of reach. This project was made in tandem with a Romi chassis, rack and pinion for horizontal motion, and a gripper. Only the scissor lift is included here. Shoot me an email if you'd like the other files!
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Aedan Bingham.
Archivos (8)
- Bottom.stl STL
- Lower Joint Left.stl STL
- Lower Joint Right.stl STL
- middle joint 1.stl STL
- middle joint 2.stl STL
- Top Joint Left.stl STL
- Top Joint Right.stl STL
- Top.stl STL
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 81
- Publicado
Sobre este modelo
Versatile scissor lift with approximately 300mm or 1ft of reach. This project was made in tandem with a Romi chassis, rack and pinion for horizontal motion, and a gripper. Only the scissor lift is included here. Shoot me an email if you'd like the other files!
The servo used is a MG996R servo, with a metal gearbox and high torque. Other servos can be used depending on the load the lift will have to pull. As well, the top plate is configured for the attachment of a SG90 servo.
Descripción original del autor, publicada en MyMiniFactory.
