SANTA PAWS - Christmas Pet Bowl Stands | Blank Name Tags & Magnetic Pair

little Christmas gift for their favorite corner of the house.

SANTA PAWS turns two removable stainless-steel pet bowls into matching Christmas presents: rounded gift-box bodies, cream ribbon details, snowflakes and a little paw on each front tag. Use the two modules separately, or align them side by side with concealed magnets.

BLANK NAME TAGS INCLUDED Both printable name areas are smooth and blank, ready for you to add your pet's name in a compatible slicer or modeling program. The paw and raised tag border remain. MILO, LUNA and TEDDY in the gallery are personalization examples; those names are NOT embedded in the download. This is a blank mesh project, not an automatic online name generator. Personalization requires adding text geometry and re-slicing; a workflow is described in the included guide.

ONE 3MF / THREE PLATES Plate 1: bowl-fit ring, two magnet test blocks, two test caps and one silicone-foot test coupon. Print first. Plate 2: left gift-box body and its magnet-retaining cap. Plate 3: right gift-box body and its magnet-retaining cap. The finished pair has four printed pieces: two multicolor bodies and two caps. Ribbon, tag and paw are color regions within each body, not separately assembled decorations. The steel bowls and other purchased hardware are not printable parts.

HARDWARE USED FOR THIS DESIGN — PURCHASE SEPARATELY • 2 stainless-steel bowls: Yahenda 6-piece set, SELECT THE 6.9 INCH variant. https://www.amazon.com/dp/B0BM4652DV Seller-listed outer lip: 6.89 in (175 mm); inner opening: 6.10 in (155 mm); bottom: 4.72 in (120 mm); height: 2.28 in (58 mm); listed capacity: 29 oz. One six-pack supplies three pairs. The 8.3 and 11 inch variants do not fit this project. • 8 self-adhesive silicone bumpers, four under each module: the selected 160-pack at this listing, 0.50 in diameter x 0.14 in tall (12.7 x 3.556 mm). https://www.amazon.com/dp/B08BR6CGWL • 4 disc magnets, 10 mm diameter x 2 mm thick: two per module. No particular brand or magnet grade is specified; check fit and attraction using the test blocks. • PLA filament and a PLA-compatible adhesive to permanently secure the two magnet-retaining caps. Suggested palette: cranberry, forest green, ivory and dark brown.

SIZE Each body is nominally 8.07 x 8.07 x 3.07 inches (205 x 205 x 78 mm), excluding the slightly projecting front decoration, silicone feet and steel rim. A pair placed side by side is approximately 16.14 inches wide. Check that this bowl size suits your pet.

PRINT SETUP Bambu Lab X2D reference project, 0.4 mm nozzle, PLA, 0.20 mm layers, three walls, five top and four bottom layers. Main bodies use 10% gyroid; magnet caps and socket test blocks use 100% infill. Tree supports are enabled for main bodies; test parts and caps have supports disabled. The layout fits a 256 x 256 mm build area. The four-color project uses three colors per body and is intended for AMS/multicolor printing. Open as a project, preserve grouped color volumes, select your own printer/filaments and re-slice. No ready-to-run G-code is supplied.

MULTICOLOR PRINT COST Reference slicer estimates for the blank version: test plate about 2h 49m / 59 g; left body plate about 30h 18m / 737 g; right body plate about 30h 19m / 737 g. Body-plate totals include cap, support and purge. Each main plate has approximately 451 color changes. This is a substantial multicolor print, not a fast low-waste model. Added names or changed settings affect estimates. You may assign all parts of a body to one filament and paint the decorations, then re-slice; that option has not been separately benchmarked.