Santa Globe
por Roxxanne en MyMiniFactory
I created a santa globe in a lithophane. This does not need supports. I used a raft and that was it. Up to you if you want a raft,Brim or none
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Roxxanne.
Archivos (2)
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 456
- Publicado
Sobre este modelo
I created a santa globe in a lithophane. This does not need supports. I used a raft and that was it. Up to you if you want a raft,Brim or none
I loved how it turned out and thought i would share for others to make but not sell them. Santa Globe is the original one in photo's and the Santa Claus Globe is same but a different base. I printed up the Santa Globe.
I hope you enjoy the print.
Update- Settings to print this up. Printed with a 0.4mm nozzle, 0.1 layer height, 99-100% infill, Print speed 30 to 45mm/s. Build plate adhesion can be none/brim/raft and please don't add supports or you will have a hard time removing them from inside the globe. Select Super Quality :).
Descripción original del autor, publicada en MyMiniFactory.
