Samsung Galaxy S26 Ultra & Galaxy Watch Ultra – 2-in-1 Wireless Charging Stand

Samsung Galaxy S26 Ultra & Galaxy Watch Ultra – 2-in-1 Charging Station A modern, minimalist 2-in-1 charging station designed for the Samsung Galaxy S26 Ultra and Samsung Galaxy Watch Ultra. This 3D printable stand combines dedicated spaces for your smartphone and smartwatch in a single functional design. Perfect for keeping your desk, nightstand or workspace organized. Key Features - 2-in-1 design: Holds a smartphone and smartwatch together.

- Wireless charging ready: Designed for separate Qi-compatible phone and dedicated Galaxy Watch charging modules.

- Angled smartphone holder: Convenient viewing angle for notifications and everyday use.

- Space-saving design: Combines two charging locations into one stand.

- Minimalist appearance: Suitable for modern desk and bedside setups.

- Functional 3D print: Designed as a practical everyday accessory.

Compatibility Designed for: - Samsung Galaxy S26 Ultra

- Samsung Galaxy Watch Ultra series

Other devices and charging modules have not been tested. Model Dimensions - Width: approximately 190 mm

- Depth: approximately 86.8 mm

- Height: approximately 114.7 mm

Recommended Print Settings Setting Recommendation

Printing technology FDM / FFF

Material PLA or PETG

Nozzle diameter 0.4 mm

Layer height 0.20 mm

Infill 20% Gyroid

Walls / Perimeters 4

Top / Bottom layers 5 / 5

Print scale 100%

Supports As required by orientation

Brim Optional, 5 mm

These settings are recommendations and may require adjustment depending on the printer, filament and print orientation. Required Accessories - Compatible Qi wireless charging module for the smartphone

- Dedicated compatible Galaxy Watch charging module

- Appropriate USB power supply and cables

Important: Charging electronics, cables and power adapters are not included in the STL download. Please check the dimensions and compatibility of your charging modules before printing. Additional Information - Download format: STL

- Model type: Functional accessory

- Assembly: Installation of charging electronics required

- Intended use: Indoor desktop or bedside charging station

For long-term use, PETG is a good option where additional temperature resistance is desirable. Make sure charging modules have appropriate ventilation and do not overheat. Share Your Print! If you print this model, please share a photo of your finished setup. Feedback, ratings and suggestions for future improvements are always appreciated. Happy printing!