Safety Vest Can Koozie

The Safety Vest Can Koozie was born when I obtained a roll of Safety Orange PETG and immediately wanted to make a safety based model! This can koozie is design to give visibility to your drink so you never lose or spill your drink again! Should fit a standard 12 fl. oz. (355ml) 2.6" diameter soda/pop can. Fit is snug but not over tight. May fit a taller or narrower can but fit will be different with those size options. If the request for other can sizes/bottles is requested, I can look into making an adapted variation of the model. Let me know in the comments! Designed for printers with a least 2 tools/color options so that you can paint the strips in the slicer. Go with the classic orange/white combo or a neon yellow/orange depending on your mood! These two models were printed with Greengate3D Safety Orange PETG, and Printed Solid White and Neon PETG. NOTE: Not affiliated with Coca-Cola, Coke, or any relevant trade marks or brands associated with the cans shown in the pictures. Those were the only soda cans I had for evaluation and for the photography and I am not sponsored by them in any way. filament links here: https://www.greengate3d.com/collections/all-filaments/products/safety-orange-recycled-pet-g-coming-soon-jumbo-sized https://www.printedsolid.com/products/jessie-premium-petg-1-75mm-x-white https://www.printedsolid.com/products/jessie-premium-petg-1-75mm-x-neon-yellow?variant=39601022599253 PRINT SETTINGS: -Top Walls: 3-5 -Bottom Walls: 2-3 -Perimeters: 2 -Infill: 50% or higher -no supports needed -Paint different colors in slicer