Ryobi 2 HP Plunge Base Router (Model RE180PL1G) Dust Collector

Couldn't find the factory one anywhere and with nothing but an old youtube video and no file anywhere I decided to toss this together. Seems this model won't fit others but it might. Designed to not restrict the plunge at all and horizontal hose attachment. This is designed to be printed upside down, yes wasting little bit of support material, you will notice the 45 degree surfaces that won't require any support. I used tree/hybrid mode with supports inside the tube. Used 12 or so walls for strength. I recommend using a hose clamp over the vacuum attachment end to help prevent any stress causing layer failures. Additional Material Needed: x2 - M5 x 20mm screws Possible Future Revision > Make the hose attachment end 45 degree as well and a second version larger clearance for larger bits/vision. ** My exact model is a Ryobi 10 Amp 2 HP Plunge Base Router (Model RE180PL1G)