Rugged Box for Pittsburgh (Harbor Freight) Mini Pick & Hook Set #63697

I bought some cheap tools for work, but couldn't find a good way to carry them around in a tool bag or roll-up. Modified the rugged case that's all over the place and made an insert for the box that securely holds the tools in place. FYI, the dimensions for the box as follows: InnerBoxDepth: 52.5 InnerBoxWidth: 145 InnerBoxBottomHeight: 18 InnerBoxLidHeight: 18 This box is for the Pittsburgh (Harbor Freight) 4 pc. Mini Pick & Hook Set, Item # 63697 You probably need to modify the tabs that retain the picks for your preferred fit, fortunately I have included the FreeCAD file for the insert if you want/need to make modifications or add text. The FreeCAD files for the rugged box can be found thru the remix link. I had 2 sets of these picks, and one was tighter than the other, so you will most likely need to modify the original file for this one. You will need: 6X M3x30mm screws per the rugged box link. Insert is a light slip fit into the box; you can either leave it loose (my preference) or glue it in place. The design of the insert is such that when the box is closed, the inserts hold eachother in place so they will not move around. The tools are retained in the inserts with strategically placed tabs. I figure over time the tabs will wear out and I'll need new inserts, so it seemed a waste to make everything one-piece and have to print the whole box again.