Round Planter Abstract | Vase Mode | Shelled | Slimprint

An easy-to-print round planter, which you can print in both vase mode (single wall) and normal mode (with several walls).

Perfect for indoor plants such as succulents and cacti.

Size: 12.9 x 12 cm (scale as you like) Weight: 40 - 120 grams

I recommend printing the plant pot with a 0.6 mm nozzle or larger to ensure it is strong and watertight and will last a long time.

You can affect the strength of the walls by increasing the layer thickness.

Would you like to print this planter waterproof in vase mode? Then use a layer height of 0.15 - 0.2 mm print slowly to ensure that the layers adhere well.

I've also included a shelled version.

Happy printing

Vase mode

Nozzle size: 0.6+ Layer height: 0.15 - 0.2 mm Layer width: 0.6 - 1.2 mm Print speed: 30 mm/sec

Print time: 3 - 6 hours

Tip: Print hot (+5 - +10 degrees) for improved layer adhesion Vase mode enabled (spiralize outer contours in cura, spiral vase in prusaslicer)

Normal mode - shelled

Nozzle size: doesn't matter Layer height: 0.15 - 0.4 mm Layer width: 0.4 - 0.6 mm | 2 - 3 walls Print speed: 30 - 60 mm/s

Print time: 5 - 14 hours

Non commercial use only.