Ring Solar Panel Gutter Mount

I wanted to power my Ring cameras without running wires through the wall of my garage, so I designed this solar panel mount that latches onto the gutter.

It includes 2 clips that are used to secure a Ring solar panel (or any small device that has 4mm+ through-holes) to your gutters. The clips snap over the gutter lip, so no drilling required. Requires 2 M4 heatset inserts and 2 M4x6/8 bolts.

Compatibility Made for standard 5" K-style gutters — the boxy kind most houses have. If yours are the rounded half-round type or the bigger 6" ones, measure first because they might not fit.

Works well with my Ring Spotlight Camera 45 degree mount!

Hardware - 2 M4 heat-set inserts (into the clips) - 2 M4x6 or M4x8 bolts (panel to clips)

Printing I'd recommend printing in ASA so it won't deform in the heat or get sun-bleached. ABS also works if you don't mind some color fading. Would not recommend PLA — it will sag and deform in the heat.

No supports needed — use your slicer's auto-orient to place the parts flat on the bed.

Print Settings - Layer height: 0.2mm - Walls: 5 - Infill: 50% - Supports: No - Material: ASA/ABS

Feedback Have suggestions on ways to improve this model? Leave a comment! I'm always looking for user feedback.

Happy printing!

Want to sell this model? Become a member today! Like what I do? Buy me a coffee (https://ko-fi.com/bakedbean3d)!