Ring Cable Holder with Cable-Tie Wings (Ø16–34 mm)

Snap-in ring holder with two wings for cable ties. Fix the holder to the underside of a desk with screws, then use the wings to add a cable tie around a bundle that continues along the desk. Features - Two cable-tie slots in the wings

- Prints without supports

- Detents in both positions

Sizes Five inner diameters: Ø16, 20, 24, 28, 34 mm. - Ø16: 16 × 52 × 28 mm, 31 min on Bambu P2S, 10.3 g PETG

- Ø20: 16 × 56 × 33 mm, 32 min on Bambu P2S, 12.2 g PETG

- Ø24: 16 × 60 × 36 mm, 34 min on Bambu P2S, 13.9 g PETG

- Ø28: 16 × 64 × 41 mm, 40 min on Bambu P2S, 16.1 g PETG

- Ø34: 16 × 70 × 47 mm, 44 min on Bambu P2S, 19.4 g PETG

Part dimensions, print time and PETG weight per size. How it works Hook and ring are printed separately. The slotted ring snaps into a groove inside the hook (no supports needed), turns 180° between OPEN and CLOSED, and two rows of detents click in both positions. The ring has fine knurling for grip. Fix with one countersunk wood screw Ø4 × 20 mm (two on long or multi-ring parts); the screw sits in the floor of the hook and you reach it through the slot or the access hole. Print settings - PETG recommended (ASA/ABS also fine). PLA creeps under constant load.

- 0.20 mm layers, 4 walls, 5 top and bottom layers, 40% gyroid infill

- On its side with the ring axis vertical (the STL files are already rotated); hook and ring are separate files

- No supports needed.

- Fasteners: countersunk wood screw Ø4 × 20 mm (not included)

Files - STL: print-ready files for every size

- 3MF: sliced Bambu Studio projects (PETG, 0.4 nozzle, 0.20 mm)

Print one size first and check the fit before printing a batch. Part of the KU cable holder series: under-desk cable holders in many sizes.