Replacement Lever Handle for Husqvarna Automatic & ZigZag Sewing Machine Extension Table

This is my first functional print/replacement part. :) This 2 part print, I made to skip the need to look for steel parts that go on the Husqvarna Automatic/ZigZAG sewing machine extension table. My lever for releasing the extension table had broken off, and I wanted to keep the table instead of buying a new one. - You may need to keep the infill 100%, to make sure the part durable, as it is meant to work with a steel spring piston. - I also used a brim when printing to make sure the items did not warp.

Assembly: While it can fit snugly, it will not hold without some super-glue. 1) Apply glue to the outside of the bare steel peg, where it is milled narrower. Attach the big piece. 2) Apply glue to the little divet inside. Attach the small plug. - I've already modified this slightly from my first print, as I noticed the lever tended to get a bit stuck. Hopefully this version prints and functions without issue. :) - I'm also working on a peg for the table leg, and some plugs to replace here and there.

Some terms for use; - If you are a repair shop, you may not charge for the part, only your labor of assembly. You are free to use this in your repairs. - Do not sell it loose, such as on eBay and other sites. - That's it really.