RC Tractor
por ProfessorBoots en Printables
Till your backyard garden or maybe just climb over a pile of rocks, this is a 4wd tractor.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a ProfessorBoots.
Archivos (78)
- 1.) Body.stl STL · 608 KB
- 2.) Axle Bearing Holder.stl STL · 149 KB
- 3.) Motor Mount.stl STL · 810 KB
- 4.) Hi-Lo Gear.stl STL · 3,2 MB
- 5.) Axle Shaft Rear.stl STL · 98 KB
- 6.) Hi-Lo Clip.stl STL · 71 KB
- 7.) Hi-Lo Linkage pt3.stl STL · 102 KB
- 8.) Pinion Gear.stl STL · 918 KB
- 9.) MotorMount Top.stl STL · 792 KB
- 10.) Hi-Lo Shift Linkage pt2.stl STL · 114 KB
- 11.) Hi-Lo Linkage pt1.stl STL · 85 KB
- 12.) Axle Cover With Shaft Input Rear.stl STL · 463 KB
- 13.) Gear 3.stl STL · 503 KB
- 14.) Gear.stl STL · 396 KB
- 15.) Axle Rear.stl STL · 266 KB
- 16.) Front Tire - Left.stl STL · 263 KB
- 17.) Front Tire - Right.stl STL · 261 KB
- 18.) Rear Tire - Right.stl STL · 219 KB
- 19.) Rear Tire - Left.stl STL · 219 KB
- 20.) Wheel Rear.stl STL · 1,3 MB
- 21.) Wheel Front.stl STL · 1,3 MB
- 22.) Axle Cover With Shaft Input.stl STL · 1,0 MB
- 23.) Gear 2.stl STL · 353 KB
- 24.) Axle Shaft Front.stl STL · 98 KB
- 25.) Axle Front.stl STL · 318 KB
- 26.) U-Joint.stl STL · 37 KB
- 27.) Outer Axle.stl STL · 209 KB
- 28.) Axle Cover Front.stl STL · 436 KB
- 28.5.) Axle Cover Rear.stl STL · 304 KB
- 29.) Steering Knuckle.stl STL · 177 KB
- 30.) Steering Linkage pt 2.stl STL · 115 KB
- 31.) Steering Linkage pt1.stl STL · 107 KB
- 32.) Fender Mount - Right.stl STL · 174 KB
- 33.) Fender Mount - Left.stl STL · 174 KB
- 34.) Front Fender - Right.stl STL · 110 KB
- 35.) Front Fender - Left.stl STL · 97 KB
- 36.) Wheel Bearing Shim.stl STL · 113 KB
- 37.) Axle Stabilizer.stl STL · 59 KB
- 38.) Lower A-arm.stl STL · 283 KB
- 39.) Upper A-arm.stl STL · 216 KB
- 40.) 3-point base.stl STL · 288 KB
- 41.) A-Arm Link.stl STL · 85 KB
- 42.) Lock.stl STL · 64 KB
- 43.) Coupler Lock Pivot.stl STL · 112 KB
- 44.) 3 point servo pushrod.stl STL · 410 KB
- 45.) Front Axle Mount.stl STL · 107 KB
- 46.) Cab Top.stl STL · 165 KB
- 47.) Cab.stl STL · 241 KB
- 48.) Steering Wheel.stl STL · 36 KB
- 49.) Interior.stl STL · 802 KB
- 50.) Rear Fender - Right.stl STL · 65 KB
- 51.) Rear Fender - Left.stl STL · 66 KB
- 52.) Step - Left.stl STL · 202 KB
- 53.) Step - Right.stl STL · 201 KB
- 54.) Air Intake.stl STL · 1,3 MB
- 55.) Hood.stl STL · 914 KB
- 56.) Exhaust.stl STL · 2,2 MB
- 57.) Rear Bat Hatch.stl STL · 9 KB
- 58.) Coupler.stl STL · 128 KB
- 59.) Ripper Frame.stl STL · 308 KB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 2,057
- Publicado
Sobre este modelo
This is a fully 3D printed RC tractor featuring 4WD and, even more exciting, a servo-shifted HI-LO transmission. That means you can cruise around in high gear, then shift into low whenever you need extra torque to climb, pull, or power through rough terrain. While it may be an “RC” model, it’s really closer to a high school or college robotics project. The goal is not only to build something fun, but also to learn a bit about electronics, mechanics, and coding along the way. The 3D files are provided completely free so you can decide if it’s a project you’d enjoy building. If you do, the Professor Boots Workshop is linked below and includes step-by-step instructions for turning it into a fully functional RC tractor. Supporting the workshop helps fund future projects like this, so thank you to everyone who builds one! https://professorboots.com/products/professorboots-workshop-pass
Descripción original del autor, publicada en Printables.
