RC CyberTruck
por m2rechtin en Printables
3D Printed Remote Controlled CyberTruck
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a m2rechtin.
Archivos (40)
- Front Lower Control Arm.stl STL · 271 KB
- Front Plate A.stl STL · 435 KB
- Front Upper Control Arm.stl STL · 321 KB
- Front Plate B.stl STL · 668 KB
- Front Gear Housing.stl STL · 274 KB
- Front Suspension Mount.stl STL · 382 KB
- Front Steering Housing.stl STL · 1,5 MB
- Front_Suspension - Body Mount.stl STL · 631 KB
- Gear Spacer.stl STL · 184 KB
- Rear Motor Housing.stl STL · 1,4 MB
- Rear Plate B.stl STL · 363 KB
- Rear Plate A.stl STL · 412 KB
- Steering Arm Mirrored.stl STL · 604 KB
- Steering Arm.stl STL · 600 KB
- Motor Drive Gear.stl STL · 3,2 MB
- Steering Bar.stl STL · 113 KB
- Rear Suspension Mount.stl STL · 382 KB
- Rear Steering Housing.stl STL · 1,5 MB
- Rear Lower Control Arm.stl STL · 271 KB
- Rear Upper Control Arm.stl STL · 321 KB
- Motor Mount (1).stl STL · 1,3 MB
- CV WHEEL HOUSING - C01 (12).stl STL · 4,4 MB
- Body-CyberTruck - Windshield.stl STL · 8 KB
- Body-CyberTruck - Rear.stl STL · 1,5 MB
- Steering Knuckle.stl STL · 1,6 MB
- CV INNER RACE - C04 (8).stl STL · 4,9 MB
- Rear Plate A.stl STL · 412 KB
- Wheel Spacer.stl STL · 58 KB
- Steering Knuckle Mirrored.stl STL · 1,6 MB
- Gear (1).stl STL · 1,3 MB
- Body-CyberTruck - Front.stl STL · 1,7 MB
- Rear Gear Housing.stl STL · 232 KB
- Axle.stl STL · 222 KB
- Middle Body.stl STL · 1,1 MB
- Front Motor Housing.stl STL · 1,4 MB
- Rear Body Mount.stl STL · 631 KB
- Rear Light Strip.stl STL · 2 KB
- Assembly V2.step STEP · 11,4 MB
- CV GEAR HOUSING - C02 (13).stl STL · 4,1 MB
- CV CAGE - C03 (4).stl STL · 4,2 MB
- Categoría
- Repuestos
- Formatos
- STL, STEP
- Descargas
- 2,473
- Publicado
Sobre este modelo
This is an almost entirely 3D-printed RC version of the CyberTruck. Once built, it has four-wheel drive and four-wheel steering which makes it extremely capable both on and off road. A video documenting and showing the car can be found here:
A list of necessary hardware can be found in the video's description above. This project started with the Termo5 project several revisions ago but since then all of the parts have been modified.
Descripción original del autor, publicada en Printables.
