Raspberry Pi Zero case/Zero W case/Zero 2 W case (2h print)
por Nikolica en Printables
Pi case that i made in my free time :-)
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo; si distribuyes versiones modificadas deben ir con la misma licencia y sus fuentes.
Al descargar aceptas respetar la licencia y dar crédito a Nikolica.
Archivos (15)
- Body-withSupports.stl STL · 4,1 MB
- Body-withoutSupports.stl STL · 3,9 MB
- Holder.stl STL · 1,7 MB
- Cover1.stl STL · 388 KB
- Cover2.stl STL · 318 KB
- mount40x40-withSupports.stl STL · 393 KB
- Body-editable.f3d F3D · 700 KB
- Cover-editable.f3d F3D · 55 KB
- Holder-editable.f3d F3D · 138 KB
- mount40x40.f3z F3Z · 1,4 MB
- CaseVersionFromThePhoto(not recommended)-editable.f3d F3D · 594 KB
- CaseVersionFromThePhoto(not recommended).stl STL · 2,0 MB
- Holder_16m_0.2mm_210C_PLA_ENDER3V2.gcode GCODE · 654 KB
- Cover1_24m_0.2mm_210C_PLA_ENDER3V2.gcode GCODE · 886 KB
- Body_1h38m_0.2mm_210C_PLA_ENDER3V2.gcode GCODE · 2,5 MB
- Categoría
- Tecnología
- Formatos
- STL, F3D, F3Z, GCODE
- Descargas
- 8,998
- Publicado
Sobre este modelo
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5 Screws and Nut (3mm–27mm) 📎 https://www.prusaprinters.org/prints/112339-m5-screws-and-nut-3mm-27mm
☕ Support My Work If you found this useful and want to support future projects, consider donating: ❤ https://ko-fi.com/nikolica
Descripción original del autor, publicada en Printables.
