Raspberry Pi Camera Stand
por Daniel BP en Printables
Raspberry Pi Camera Stand Because this camera has a large focal distance and fixing the device in the printer frame…
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo; si distribuyes versiones modificadas deben ir con la misma licencia y sus fuentes.
Al descargar aceptas respetar la licencia y dar crédito a Daniel BP.
Archivos (11)
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 1,554
- Publicado
Sobre este modelo
Raspberry Pi Camera Stand
Because this camera has a large focal distance and fixing the device in the printer frame does not provide the best image. This stand allows other uses to the camera.
Features
- Compatible with the official Pi Camera rev 1.3 and similar designs
- 7 options for camera lens center height - from 5cm to 20cm
- No hinge in the base - for people who believe and respect the law of gravity
- Use a 3mm x 20mm bolt or a nail as hinge
- The case is slighly raised to protect the lens without compromising the view angle
- This will not deform with time even if installed in the horizontal
Print instructions
- Use supports only to the bed, when printing the pole and the box.
- Remember that the indicated height is from the bottom to the camera lens, not the pole height.
Descripción original del autor, publicada en Printables.
