Raspberry Pi 3A with 3.5 inch GPIO LCD Case
por MortalWombat en Thangs
Case for a RPi 3A or 3A+ with a 3.5" GPIO touchscreen. It's perfect for a klipper / klipperscreen setup. I used the display from this kit, but any 3.5" 480x320 GPIO module should work : https://www.amazon.com/dp/B08864L7N3
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a MortalWombat.
Archivos (3)
- RPi_3A_3.5LCD_Frame.stl STL · 4 KB
- RPi_3A_3.5LCD_Case.stl STL · 114 KB
- RPi_3A_3.5LCD_Fan_Bracket.stl STL · 58 KB
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 46
- Publicado
Sobre este modelo
Case for a RPi 3A or 3A+ with a 3.5" GPIO touchscreen. It's perfect for a klipper / klipperscreen setup. I used the display from this kit, but any 3.5" 480x320 GPIO module should work : https://www.amazon.com/dp/B08864L7N3
The fan bracket is optional, but the kit came with a 25mm fan, so I figured I'd utilize it. Just zip tie the fan to the bracket.
You'll need some M2x6mm or smaller screws to secure the RPi in the case.
Print parts as provided. No supports are necessary as long as your bridging is halfway decent.
Descripción original del autor, publicada en Thangs.
