Quick & Easy First Layer Test (PLA, PETG, ABS)

This is a simple 70mm x 70mm first layer test & adjust print.* .3mf files included for PLA, PETG & ABS BEFORE PRINTING THIS: Please consider - -Your build plate and print nozzle are clean -Follow your printer manufacturer's methods bed levelling and first layer and tool head calibrations; this test print is meant to be for final fine tuning of first layer print quality. -I also highly recommend that you print this temperature tower to determine the nozzle temp. of the filament you are using if you are not certain of it. www.printables.com/model/1212619-grandpas-best-temperature-tower/files WARNING: When fine tuning the Z height be very cautious not lower the nozzle too low - nozzle tip touching the bed. Although the preset layer height of this print is 0.3mm for 1 layer, once you have fine tuned this first layer, it should be set for any layer height you choose. *The optimal first layer should have evenly printed ‘lines’ with consistent surface. When removed from the print bed the print should flex but but not easily break - too high or too low Z height will break easy. Please hit the like ♥ and post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page. Also, Please rate my print if you like it. Thanks :D Please consider joining my Printables Club and follow me on: Printables.com www.facebook.com/profile.php?id=100082036420297 Twitter: @Ozzy_The_Artist Thanks :o )