Quarter Turn Paper Towel / Toilet Paper Holder

Behold ! Years later, an improved version of one of my most used (by me) models. The threaded version was great, but lets face it, turning the screw a couple of full turns every time the roll was empty got old in the end. This quarter turn version fixes the biggest gripe about it by using a quarter turn lock that's very satisfying to use and much faster as well. I also added an additional stabilizer base to help with side-to-side movement and prevent the screws from pulling out prematurely. The screw size and spacing should be identical and allow a direct retrofit for the old one. You have to print doubles of each part, no need to mirror anything. The arrow on the supports indicates the direction of lock, which should be the direction you will pull your paper towards. The quarter lock is quite secure with my own printer, but your experience might be slightly different and making sure to follow the arrow will insure your roll can't ever fall while you're pulling paper out. PLA is very fine, my old one is still going strong 5 years down the road. I think I used 3 perimeters, 15% cubic infill. Any comment is welcomed, hope you enjoy it as much as I do !