Pumpkin Hug Ghost — Cute Halloween Decoration — STL & 3MF

Pumpkin Hug Ghost By Nawwa.4X · Version 0.1.0 · Digital model · unverified print settings

A friendly ghost hugging a ribbed jack-o'-lantern on an integrated oval base. One connected decorative model with recessed facial details. No assembly is required.

Validation status: geometry/export checks passed. No slicer profile or physical test print has been verified. Support requirements and printer compatibility have not been verified. Do not treat this model as support-free or physically print-tested.

Files and dimensions | Height | Approximate width × depth × height | Included formats |

| 80 mm | 57.61 × 56.81 × 80 mm | STL, model-only 3MF |

| 100 mm | 72.01 × 71.01 × 100 mm | STL, model-only 3MF |

| 120 mm | 86.41 × 85.21 × 120 mm | STL, model-only 3MF |

These are three convenience sizes of one design, not three different sculptures. Each export contains 496,050 triangles. STL coordinates are intended as millimeters; 3MF declares millimeters explicitly. Import one file for your chosen size, rather than all six.

The 3MF files contain model geometry only. They are not Bambu Studio/OrcaSlicer/PrusaSlicer printer projects, and include no selected printer, filament, supports, paint assignments, temperatures or G-code. Choose your own validated printer/material profile.

Suggested first test These are starting points, not tested print settings:

1. Import the 100 mm file into your slicer and confirm its dimensions are approximately 72 × 71 × 100 mm. Keep the flat oval base on the build plate.

2. For an FDM PLA trial with a 0.4 mm nozzle, consider 0.16–0.20 mm layers, three perimeters, and 10–15% infill, using your printer manufacturer's calibrated profile.

3. Inspect supports under both arm arches, around the hands and below the pumpkin's forward underside. Recess roofs and the stem should also be checked in the sliced preview. Support requirements are not verified; do not assume that “touching build plate only” will cover every area.

4. Inspect the first layer, layer-by-layer islands, facial details, supports and removal access before printing. Adjust support placement and interface settings to your printer and filament.

5. Print one sample, assess the base, overhang surfaces, stem and facial details, then record the actual machine, filament, settings, time, material usage and result.

For resin printing, orientation, supports, exposure and any hollowing/drainage are separate work. No resin setup has been tested or supplied. The provided geometry is solid; an FDM slicer sets its own infill. No loose internal parts, drain holes or hollow cavity are intentionally included.

Blender source source/Pumpkin_Hug_Ghost.blend was created in Blender 5.2.3 LTS. Earlier Blender versions have not been verified. Blender is not required to print the exported STL/3MF files.

- PRINT_export_only_this_mesh contains the finished printable object.

- DESIGN_MASTER_hidden_do_not_print retains the separate construction components for editing. These overlap and must not be substituted for the fused print mesh without rebuilding and rechecking it.

- Floor, camera and lights are presentation objects. Do not include them in a print export.

- The source scene uses millimeter units. If you export it yourself, confirm the resulting dimensions in your slicer.

Images and color The included PNGs are actual Blender renders of the model, not photographs of a physical print. Views labeled monochrome show the single-material geometry. 04_painted_digital_example.png shows an optional paint scheme only. It does not imply that multicolor printing, paint masks or a color-print project are included.

Creation and licensing Created through an AI-assisted procedural Blender modeling workflow, followed by geometry repair, export verification and visual inspection. It must not be represented as a handmade sculpt or as eligible for every marketplace's AI policy.

The marketplace license selected at checkout governs the purchase; this package supplies digital files, not a physical object. Commercial sales of physical prints are not included in this personal-use edition.

Support: [email protected]. Include the product version and your software/printer details. Do not send credentials or private project files.