Prusa Core One Printhead cover with vents (just like the C1L)
por Philip Sørensen en Printables
The Core One L introduced vents in the printhead cover, improving cooling of the Loveboard. I ported them to the C1.
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo; si distribuyes versiones modificadas deben ir con la misma licencia y sus fuentes.
Al descargar aceptas respetar la licencia y dar crédito a Philip Sørensen.
Archivos (1)
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 2
- Publicado
Sobre este modelo
These cooling vents closely match those found in the Core One L. This improves the cooling of the Loveboard, which is useful if you are planning on pushing the chamber temperatures.
Why did I do this? I did this because I decided to upgrade my Core One from the stock 55C chamber limit to the C1L-approved 60C limit after I installed an active chamber in my C1. Therefore, I need to make sure that I add any high-temperature adaptions from the C1L to the C1. So far, this is the only adaption I have noticed, but please let me know you notice other changes which helps the C1L survive 60C!
I made custom firmware to override the 55C chamber limit with a new 60C limit. If you want to use that also, feel free to grab it here: https://github.com/philip-soerensen/Prusa-Firmware-Buddy
To help sustain those temperatures, this is the heater I am using: https://www.printables.com/model/1696936-jetpack-chamber-heater-for-the-core-one
The remix is based on printhead-cover-rear-r2.stl, so I unfortunately don't have any STEP files to share here.
Descripción original del autor, publicada en Printables.
