Prusa Core One Drybox Updated for Core One+ Spoolholder + NFC
por johnyHV en Printables
The frame sections are 23 mm thicker to allow for the mounting of the new Core One+ coil holder with an NFC reader.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a johnyHV.
Archivos (5)
- Categoría
- Para tu impresora
- Formatos
- 3MF, STL
- Descargas
- 12
- Publicado
Sobre este modelo
After installing the NFC reader with the new spool holder, the door cannot be closed. The NFC reader adds an extra 16mm in height. I modified the frame parts and increased its depth. Thanks to this, the plexiglass was shifted, and the door can now be closed nicely. I haven't tested it with the USS DryBox, but it should fit. I am only uploading the parts modified by me. You can use the original screws specified by the model's author.
These replace the following parts from Haasi: - Frame Upper Left
- Frame Upper Right
- Frame Lower Left
- Frame Lower Right
You need to download the remaining parts from the model's author, HASSI.
Descripción original del autor, publicada en Printables.
