Print-in-Place Rising Box
A little print in place container concept with a rising inner box I've been working on and plan to build upon further.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Jouni A.
Archivos (3)
- Print in Place Rising Box.3mf 3MF · 930 KB
- Print in Place Rising Box.stl STL · 3,5 MB
- Print in Place Rising Box - Ring Ding-a-Ling.stl STL · 187 KB
- Categoría
- Repuestos
- Formatos
- 3MF, STL
- Descargas
- 626
- Publicado
Sobre este modelo
A little print in place container concept with a rising inner box I've been working on and plan to build upon further.
To make it a bit more useful, I designed a small separate attachment you can add to make it pop… See it in action: https://youtu.be/_wPec0dZNh8
After printing, push the lids up at the same time and push the inner box down (https://media.printables.com/media/prints/492000/rich_content/982ad883-61c1-486b-aed2-de449f62fb03/thumbs/cover/800x600/png/image.webp) until the built in supports come out.
Remove the supports and you're good to go. (https://media.printables.com/media/prints/492000/rich_content/923ba94e-001d-4478-843b-81b3a17528e3/thumbs/cover/800x600/png/image.webp)
If you print the ring attachment, I recommend PETG.
Descripción original del autor, publicada en Thangs.
