Print in Place Dial-Indicator! - For easy Bed leveling!
por An Cs en Thingiverse
This is my Print in place - Compliant mechanism using Dial indicator! No supports, no assembly, just print and use! See how it works, and how it was designed!: https://youtu.be/RFkn6gMkz78 All clearances are 0.3mm/ 0.4mm/ 0.5mm, so most household 3d-printers should have no problems printing it...
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a An Cs.
Archivos (5)
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 21,943
- Publicado
Sobre este modelo
This is my Print in place - Compliant mechanism using Dial indicator! No supports, no assembly, just print and use! See how it works, and how it was designed!: https://youtu.be/RFkn6gMkz78 All clearances are 0.3mm/ 0.4mm/ 0.5mm, so most household 3d-printers should have no problems printing it. Important: -Use 0.2mm layer height or finer! -Use a 0.4mm Nozzle -No Support Please leave your questions and comments in the comment field, and I’ll do my best to answer them. Every like is appreciated! :) Update: 7/7/2020-Changed the ender3 dial holder to be in the correct print orientation. Update! I have now a Partreon, chek it out! https://www.patreon.com/Turbo_SunShine Update2: I made an instructables on how to design something like this! https://www.instructables.com/id/Dial-Indicator-Using-Compliant-Mechanisms/ Check out my social media : YouTube Facebook Instagram
Descripción original del autor, publicada en Thingiverse.
