Priming Station - Swarm
por Sirius Industries en MyMiniFactory
Priming station for painters who need to deal with lots of tiny bits. The individual holes are about 3mm wide so you can stick a tiny bit (say pouches, heads, etc.) on a bamboo toothpick and insert the toothpick to the slot when to dry. The wider insert is made for connected arms while the square bi
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Sirius Industries.
Archivos (3)
- base.stl STL
- square stick.stl STL
- wide stick.stl STL
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 37
- Publicado
Sobre este modelo
Priming station for painters who need to deal with lots of tiny bits. The individual holes are about 3mm wide so you can stick a tiny bit (say pouches, heads, etc.) on a bamboo toothpick and insert the toothpick to the slot when to dry. The wider insert is made for connected arms while the square bits can be used for body/ torso bits or even bases.
Descripción original del autor, publicada en MyMiniFactory.
