POUCH SQUEEZER – Cat Food Packet Squeezer | No Supports
Get more food out of wet cat food pouches with this simple 3D printed squeezer. Slide the pouch into the slot and press the contents toward the opening over your cat’s bowl.
Cults3D entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalLicencia de uso privado de Cults3D: puedes imprimirlo para ti. No se permite compartir el archivo ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a cuplcompg.
Archivos (2)
- Pouch_Squeezer_127mm_No_Supports.stl STL
- Pouch_Squeezer_Original.3mf 3MF
- Categoría
- Hogar
- Formatos
- STL, 3MF
- Descargas
- 0
- Publicado
Sobre este modelo
Get more food out of wet cat food pouches with this simple 3D printed squeezer. Slide the pouch into the slot and press the contents toward the opening over your cat’s bowl.
Why print it?
Prints without supports: the flat print orientation is included in the 3MF and STL.
One-piece design: no screws, assembly or extra hardware.
Made for pet food pouches: a compact tool for your daily feeding routine.
Easy to grip: a U-shaped body with two long pressing arms.
Real printed prototype: matte beige PETG, shown in the photos and demonstration.
Dimensions
Approximately 127 × 44 × 10 mm. Check the slot and pouch fit before use; pouch widths and seams vary.
Included files
STL with the same geometry, laid flat for slicing.
Original 3MF with the saved print orientation and Anycubic Kobra S1 settings.
How to use
Open the food pouch as instructed on its packaging.
Hold it over the bowl and guide the closed bottom end into the squeezer slot.
Slide the tool toward the opening to push the food out.
Remove the tool and wipe or hand-wash it after use.
The tool presses the outside of the pouch. Do not force a thick seam through the slot; check the fit first.
Designed and printed by ClearSwing 3D / cuplcompg. Share a Make if you print one!
Descripción original del autor, publicada en Cults3D.
