Post Cap
por 3D Printing World en Thangs
These post caps are designed to be printed in two pieces to hid the mounting hardware and so they can be printed without supports. They are designed to fit on the top of a 4”x4”(3.5” actual) post with two or four wood screws. Affix the bottom to the post first, before snaping on the top. Do NOT asse
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesNC LICENSES
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a 3D Printing World.
Archivos (3)
- POST CAP-BASE.stl STL · 573 KB
- POST CAP-TOP.stl STL · 119 KB
- POST CAP-ASSY_REF_ONLY.stl STL · 692 KB
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 519
- Publicado
Sobre este modelo
These post caps are designed to be printed in two pieces to hid the mounting hardware and so they can be printed without supports. They are designed to fit on the top of a 4”x4”(3.5” actual) post with two or four wood screws. Affix the bottom to the post first, before snaping on the top. Do NOT assemble them before they are mounted as they are not designed to come apart.
Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer
_Note: The assembly model is for reference only._ ___ Support and Licensing If you would like to help support more free models please consider joining my Thangs Membership (https://than.gs/u/35786?plans=true) To get permission to sell physical copies of my models, consider joining my Patreon (https://www.patreon.com/3dprintingworld)
Descripción original del autor, publicada en Thangs.
