Poop Collector for Elegoo Centauri Carbon with CANVAS

Poop Collector for Elegoo Centauri Carbon with CANVAS Model version 1.0.0 | Release date: 2026-11-03 Design by Amit Kuzi A magnetic purge-waste collector for the Elegoo Centauri Carbon with CANVAS. The open-top body catches filament purges and scraps beside the printer. Two creator photographs show the installed orange collector, including a view with collected waste. Included files - One STL exported directly from the supplied canvasPoopShoot.3mf, preserving its saved print orientation and size. - The unchanged ElegooSlicer project, containing one body on one plate. - Printing and file guide. Print settings saved in the project Elegoo Centauri Carbon; 0.6 mm nozzle; 0.36 mm layers; 2 walls; 15% rectilinear infill; supports disabled. The body is assigned to filament slot 2: Elegoo PETG @elegoo, with 250 C nozzle temperature. Other saved filament slots contain PLA presets. These are saved settings, not newly tested recommendations or confirmation of the material used in the photographs. Import the STL in millimetres at 100%. Its exported print-orientation bounding box is approximately 237.61 x 212.81 x 170.15 mm. The unrotated body measures approximately 160 x 160 x 156.38 mm. Print in the orientation saved in the supplied 3MF. The creator confirms no supports are needed. The supplied STL preserves that same print orientation; use it without auto-orienting. Select filament temperatures appropriate for your material. This is an ElegooSlicer project, not a Bambu Studio print profile. No G-code is included and no new slice or physical test of this supplied file is claimed. Magnetic mounting Use three round magnets of 6 mm diameter and three of 8 mm diameter (six total). The creator confirms thicknesses from 2 to 8 mm will work. Check polarity and fit before securing the magnets. Amazon product examples (diameter x thickness): - 6 x 3 mm disc magnets — https://www.amazon.com/dp/B0GY3Z1KFD — use 3. - 8 x 3 mm disc magnets — https://www.amazon.com/dp/B0CDGYTLH6 — use 3. These are ordinary product links, not affiliate links. The seller-stated dimensions fall within the creator-confirmed range; these particular products have not been physically tested with the collector. The printer, CANVAS hardware, ducting and other accessories visible in the photographs are not included. License: CC BY 4.0 — https://creativecommons.org/licenses/by/4.0/ Credit Amit Kuzi and indicate changes when sharing a remix.