Plague Doctor / Victorian Syringe

!!WORK IN PROGRESS!! Things to change/fix before full release: (In order) - Verify & ensure TPU functionality.

Most victorian-era / plague doctor inspired syringe props I found aren't functional, since they're intended to be filled with liquids such as that found in glow sticks; then sealed of. I wanted a functional one since I believe it's more fun if it's interactive, so I took the chance to make my own 🎃 I haven't measured it yet, but I think it'll hold around ~45ml -- around the size of a large shot! Perfect if you're going to a party ;) But if you're planning on consuming alcohol from it, make sure you take the chemical resistance of your glue into consideration; you don't want to accidentally consume it. From my reading, most hot-glue sticks, and superglue made from ethyl cyanoacrylate should be fine for short-term exposure. Also understand that most 3D prints are never truly food-safe. Ultimately, your safety is your own responsibility. Under 18? Use it for Capri-suns or something idk. Designed for a gasket with an outer diameter of ~26mm, and an inner diameter of ~22mm. I'd imagine it's possible to print one out of TPU if needed, but I haven't tried it. I've included a couple gasket models for you to try, though they might need to be up/down scaled by a few percent. I also suggest enabling "Make overhangs printable" in your slicer since it's not designed for printing. Honestly I doubt the gasket models will work in their current state, so eventually I'll probably print some TPU gaskets myself to make sure they work; but I won't have time before halloween '26. You may try, but I wouldn't suggest it unless you're willing to go through some trial & error. Assets used in cover photo: 'Writing Desk' by Osian CG 'Pierandrea Matthiolus’s Herbarium' by Virtual Museums of Małopolska 'Packaging for ointment for the treatment' by Virtual Museums of Małopolska 'Ink Bottle with Quill' by Matthew Collings 'Wood 027' by ambientCG 'Metal 046 A' by ambientCG 'Metal 061 A' by ambientCG