Pin-Support Challenge

THIS IS A GCODE FILE. This is not an .stl file or .stp file. This is pre-sliced and ready to print. I have only been able to test this g-code file one a few Ender style 3D printers how ever it should work with most 3D printers. If you fell uncomfortable however feel free to use this link. https://fullcontrol.xyz/#/models/67cf20

Here you can make any changes to the model that you like. This print takes about 12 minutes and is a really fun but useful way to see if your printer is tuned in. WARNING! Before printing this model put it into the slicer you use for your printer. You won't be able to edit the model but you be able to view the model and assure yourself that everything is on the build plate and looks good. Temp: 205 Build-plate: Temp: 60 Nozzle: .4mm These parameters are pre-sliced. All you need to do to get this print going is download it and plug it in. IMPORTANT! The Printer will auto-home before preheating. Once heated it will move the hot end up, purge, auto-home, and then start the print.

Disclaimer: This is not my model. If can be found at this website →https: //fullcontrol.xyz/#/models However I uploaded this to Printables simply for ease of access. I have no way of officially giving credit to this website for these models. However these are generated by the parameters I have entered in.