Perfect Filament Storage

This is my second version of my filament storage. It is about as good as you can get when it comes to looks and reliability. It works on literally everything; Refill boxes, Spools, Spools in Bags, Spool Boxes, the list goes on... This print profile is about as close as I can get it to printing reliably and being as cheap as possible (by making the print have 2 walls it makes it feel even more premium, but it costs significantly more). I spent way too much time prototyping this project and spools of filament than I would've liked, but I believe the end result is worth it. I have put about 30 hours into this project and have 100 hours of experience from my first design, so this one should be perfect!

My Recommended Print Settings are: 0.25MM Layer Thickness 1 Wall with Arachne Wall Generation 5% Gyroid Infill NO SUPPORT NEEDED! This file allows for your printer to print without support! If you are using a bed slinger printer, then orient the storage where the long side is perpendicular to the way the build plate moves.