Penny Board 1.0
por Simone Fontana en MyMiniFactory
THIS MODEL IS COVERED BY MMF COPYRIGHT, SO YOU CANNOT SELL IT OR UPLOAD IN OTHER WEBSITE WITHOUT MY PERMISSION
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalMyMiniFactory - Credit - Noremix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Simone Fontana.
Archivos (6)
- Board 1.Stl STL
- Board 2.Stl STL
- Board 3.Stl STL
- Board 4.Stl STL
- Board 5.Stl STL
- Pin X12.Stl STL
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 1,965
- Publicado
Sobre este modelo
THIS MODEL IS COVERED BY MMF COPYRIGHT, SO YOU CANNOT SELL IT OR UPLOAD IN OTHER WEBSITE WITHOUT MY PERMISSION
I look around and i find someone try to replicate the Penny Board but without success, so i decide to take this challenge and i won!
I suggest to print the pin in 100% and all the other piece with an infill from 25% to 100%.
The back part i suggest to print from 75% to 100% need to be really strong!
You need 3 steel bar with 6.4mm diameter:
- 2 long 43 cm
- 1 long 45 cm
SUPPORT FREE
HERE THE VIDEO!
Descripción original del autor, publicada en MyMiniFactory.
