PegHook Set

Hooks for pegboard on a 1 inch grid, with a lock tab so they do not lift out.

Straight, J, double, loop, and bin hooks for 1 inch pegboard.

This model was designed in OpenSCAD with AI coding assistance.

License: CC BY 4.0. You can share it and adapt it. Credit the design, link the license, and say what you changed.

Recommended print: PLA, 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% infill, no supports. Keep each STL in the orientation it was saved.

Pictures are OpenSCAD renders.

Files and slicer estimates:

PrusaSlicer 2.7.2, generic PLA, the settings above. These lines are copied from the gcode summary.

• peghook-straight-quarter.stl. Default straight hook, 1/4 inch board, 1/4 inch hole, lock tab on. estimated printing time (normal mode) = 11m 32s. filament used [g] = 2.07.

• peghook-jhook.stl. J-hook, 1/4 inch board and hole, 42 mm reach. estimated printing time (normal mode) = 14m 26s. filament used [g] = 2.54.

• peghook-double.stl. Double prong, two holes one inch apart. estimated printing time (normal mode) = 24m 34s. filament used [g] = 3.46.

• peghook-loop-24mm.stl. Tool loop, 24 mm inside diameter. estimated printing time (normal mode) = 16m 41s. filament used [g] = 2.79.

• peghook-bin-clip.stl. Bin clip for a 2.8 mm rim, 1/8 inch board, 1/4 inch hole. estimated printing time (normal mode) = 8m 0s. filament used [g] = 1.46.

The scad file is one file for the customizer. No other file is required.

What you can change:

• Board thickness: 1/8 inch or 1/4 inch.

• Hole diameter: 1/8 inch or 1/4 inch. The prong is sized so it passes that hole.

• Extra room in the slot that grips the board.

• Hook type: straight, J-hook, double prong, tool loop, or bin clip.

• How far a straight hook or J reaches.

• Inside diameter of the tool loop.

• Thickness of the bin rim the clip grabs.

• Lock tab on or off. It sits one inch above the main prong.

Load: hand tools and light bins. A 1/8 inch hole makes a thin prong, so keep those hooks light. Do not hang from the hook or load it with anything that could fall on a person.

Share a make if you print it!