Pegboard Multi Scissor Stasher

This is made for standard pegboards with 1/4" holes that are spaced 1" apart. It has two pegs on the top and two on the bottom to help with stability, especially when pulling the scissors out. The bottom two pegs are made to be a fairly tight fit in the holes, so it may have difficulty going in depending on how precisely your parts are true-to-size.

Some important considerations with this print: This scissor holder works best for the types of scissors I had in mind that are shown in the image. You may run into issues with the scissor handles hitting the pegboard if your scissors have a significantly different shape or size. The bottom hole where the scissor blades come out have a dimension of 8mm x 16mm for each of the three. The holder is also angled to have the scissor blades point inwards toward the pegboard (for safety), but depending on your scissor's dimensions, they may contact your pegboard which could scratch it over time. The stands holding the scissor holder off the pegboard are 15mm tall to help with this (plus an additional 2mm if you include the wall thickness of the holder itself).