Pastel Airplane Wall Art – 6 Color Relief, 180 mm

A pastel airplane and pilot flying through stylised clouds, made as a shallow decorative wall plaque. Dimensions Approximately 180.1 × 180.1 × 4.3 mm. Import in millimetres at 100%. Files and colours - One multipart 3MF with the six colour parts aligned. - Six separate STL files: Himmel (sky/base), Creme, Pink, Mint, Haut (peach) and Dunkel (dark details).

Open the 3MF as a multipart model and assign each part to the desired filament. For STL import, load all six files together as parts of one object, keeping their shared coordinates. Do not arrange or drop colour parts onto the bed separately. The parts overlap slightly where they join the base; inspect the combined slicing preview. The full colour layout requires a compatible multicolour workflow; a simple layer-change alone cannot reproduce different colours within the same layer. A single-colour print is also possible by assigning all parts to one filament. Printing PLA for indoor decoration; 0.4 mm nozzle, 0.16–0.20 mm layers, 3 walls and 100% infill as a starting point for this thin plaque. Print with the flat back on the bed and the artwork facing up. No rafts; normally no supports. Check bridging over the rear hanging recess and use local support only if needed. Hanging A recessed keyhole is included on the back. Use a suitable screw head and check engagement before hanging. Keep PLA away from strong heat and direct sun. CC BY-NC-SA 4.0.