Panel Light Rain Cover
por Christopher Chang en Thingiverse
Meant to be a rain cover for the Zhiyun M60 Ultra. On base plate use 1/4-20 tap to thread both holes Use 1/4 - 20 screw to affix light in hole that has a divot Use 4x M2 x 10 self tapping screws to affix base to actual rain cover Optional Use A4 sized thing acrylic sheet and glue over the cover...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Christopher Chang.
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
Meant to be a rain cover for the Zhiyun M60 Ultra. On base plate use 1/4-20 tap to thread both holes Use 1/4 - 20 screw to affix light in hole that has a divot Use 4x M2 x 10 self tapping screws to affix base to actual rain cover Optional Use A4 sized thing acrylic sheet and glue over the cover. Once in place run the edges over with a Jet lighter until material is soft, fold down to the size. Repeat both sides.
Descripción original del autor, publicada en Thingiverse.
