Panavise Inspired Vise
por Adam Cook en Printables
Here is a little vise guy I designed
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Adam Cook.
Archivos (11)
- Panavise Assembly.step STEP · 4,7 MB
- Vise Adapter Shaft.stl STL · 5,8 MB
- Vise Adapter Clamp Side 1.stl STL · 20,3 MB
- Vise Adapter Clamp Side 2.stl STL · 21,5 MB
- Vise Adapter Nut.stl STL · 38,6 MB
- Panavise Sphere Clamping Screw.stl STL · 40,9 MB
- Panavise Sphere Clamp.stl STL · 51,9 MB
- Panavise Base Bottom Cover.stl STL · 58,6 MB
- Panavise Sphere Bottom Nut.stl STL · 101,1 MB
- Panavise Base.stl STL · 170,4 MB
- Self Centering Vise.stl STL · 500,5 MB
- Categoría
- Herramientas
- Formatos
- STEP, STL
- Descargas
- 44
- Publicado
Sobre este modelo
Here is a panavise model I've been working on. Video shows the assembly.
Print Settings: I printed my parts out of PETG at 0.3mm layer heights with a 0.4mm nozzle and 4 walls. NO SUPPORTS! You will need to print one of every STL. Make sure your first layer is good! Specs: The vise can open to around 130mm Jaws are 38mm wide The main vise screw is a two start 10mm pitch screw, so each turn of the screw moves the jaws 20mm Hope you all like it!
Descripción original del autor, publicada en Printables.
