Owl's Watching You - HueForge Print

Want to have an owl staring at you 24/7? In black and white? Well, just print this!

3MF will have all layer swaps already loaded in. If you want to change the size, PLEASE only change the X and Y dimensions, and do not touch the Z.

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2mm and the Actual Depth is 2.1mm

Filaments Used: - PLA Kingroon Black Transmission Distance: 0.3 - PLA Chrominal Penumbra Gray Transmission Distance: 6.9 - PLA TECOR Beige Transmission Distance: 6.3 - PLA Kingroon White Transmission Distance: 5.8 This print uses 4 unique filaments

Swap Instructions: - Start with Black - At layer 0.76mm swap to Penumbra Gray - At layer 1.32mm swap to Beige - At layer 1.64mm swap to White for the rest.

Have a hoot of a time printing this!

____________ If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan! (https://thangs.com/designer/cyanidesugar/memberships), or if you prefer, my Patreon (https://www.patreon.com/cyanidesugar3DP).

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models. _____________