OOKER | foldable table hook, print-in-place
OOKER | foldable table hook, print-in-place
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a Charles R.
Archivos (1)
- OOKER_table-hook_V1.stl STL · 28,6 MB
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 198
- Publicado
Sobre este modelo
OOKER | foldable table hook, print-in-place
Your purse's new best friend. A foldable table hook, to keep your purse in-sight and within hand-reach.
Thick or thin tables, it works on all.
100% print-in-place, no assembly needed. The hinge was designed so the 2 articulated pieces can be printed together in one go.
It prints in 20min and only needs 13g of filament.
The hooks on the pictures were printed with PLA. But if you hang a heavy bag for a while, the hook changes shape a little and doesn't swivel back in as well. So PETG or strong PLA might work better.
Happy printing!
DIMENSIONS (closed) | W 12 mm x D 69 mm x H 52 mm
DIMENSIONS (open) | W 12 mm x D 69 mm x H 88 mm
3D PRINT SETTINGS 100% print-in-place. The STL file is already oriented properly. No supports needed. No Brim needed.
Resolution: 0.3mm/layer or less Wall line count: 2 Infill: 40% Build adhesion type: None Supports: None
Descripción original del autor, publicada en Thangs.
