Octopus Stand Version Three
por Colin Payson en Thingiverse
Version three of the Octopus tablet stand. This one was designed to fit the iPhone 6/6 Plus, iPad Air and a slew of Android devices. There should be just enough room for a case with most devices. I recommend adding a little bit of sticky adhesive to the bottom to keep it nice and secure. I've...
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Colin Payson.
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 131,606
- Publicado
Sobre este modelo
Version three of the Octopus tablet stand. This one was designed to fit the iPhone 6/6 Plus, iPad Air and a slew of Android devices. There should be just enough room for a case with most devices. I recommend adding a little bit of sticky adhesive to the bottom to keep it nice and secure. I've uploaded a slightly earlier version of the design. It has bit tighter of an opening and slightly more height to it if you find your device is wobbly. Note: the Moto X 2014 is pretty wobbly in it and I would not recommend it at this time. I've printed a copy of this out at Shapeways myself, as I am absent a 3D Printer :( You can find it here if you're in the same boat as I. http://shpws.me/wIBN
Descripción original del autor, publicada en Thingiverse.
