Nuna Mixx Hook
por gregoryhaegele1 en Thingiverse
Designed a simple bag hook that snaps onto the handle. TIPS: - Depending on your filament and tolerances, you may need to scale. I printed my final clip in PET-CF17, and scaled 101% only in the long direction. - Don't print in PLA, PET/PETG should be ok - The hook is able to be repositioned easily..
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a gregoryhaegele1.
Archivos (1)
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
Designed a simple bag hook that snaps onto the handle. TIPS: - Depending on your filament and tolerances, you may need to scale. I printed my final clip in PET-CF17, and scaled 101% only in the long direction. - Don't print in PLA, PET/PETG should be ok - The hook is able to be repositioned easily up and down the shaft, but a downward load on the hook shouldn't make the hook shift due to the added friction. Worst case scenario you can just use the hook at the bottom of that portion of the shaft - Mirroring the part will allow it to work on both sides - Print in the shown orientation, and print with a ton of walls so the whole part is solid
Descripción original del autor, publicada en Thingiverse.
