No AMS, Mechanical Gift Box with Lifting Platform

Turn the crank and reveal the surprise! 🎁 This mechanical gift box makes opening a present part of the experience. Turn the handle to open both lid halves while the platform raises your gift into view. Turn it back to lower the platform and close the box again. A special way to present a small gift for Christmas, a birthday or another memorable occasion — and a reusable box to keep afterwards. ✨ Features • Hand-operated mechanism with printed gears. • Two opening lid halves and a moving gift platform. • Decorative ribbons and bow for the classic gift-box look. • Customizable colors to suit the occasion. • Separate print profiles for the Bambu Lab A1 mini and H2S. • No motor, batteries or electronics required. 🎨 Color inspiration Red box, dark green ribbons and bow, black mechanism and a silver platform — a festive combination for Christmas. Other color combinations work just as well for birthdays and special occasions. 🔧 Printing and assembly This is a multipart assembly project. Screws, nuts and other hardware are required in addition to the printed parts. Please follow the hardware list and assembly instructions supplied with the model. Remove supports and clean the contact surfaces carefully. Check that the gears, platform and lid joints move freely before placing a gift inside. Use a small, lightweight gift positioned centrally on the platform. Turn the crank gently and stop when the mechanism reaches either end of its travel. Forcing the handle beyond the stops can damage the printed gears. 🤖 Development This project was developed with AI assistance. ❤️ Support the project If you enjoy this model, a like or boost would be greatly appreciated! Feel free to share a photo of your finished box — I would love to see your color combinations. Thank you for supporting Boat Parts 3D

Boost MeIf you like this model, a boost would mean a lot! 🚀 Thank you for your support!