NFT Hydroponics System
por Matthias Matousek en MyMiniFactory
This is a small 3D printable hydroponics system. It requires a small water pump and a tube to pump water through.
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Matthias Matousek.
Archivos (7)
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 276
- Publicado
Sobre este modelo
This is a small 3D printable hydroponics system. It requires a small water pump and a tube to pump water through.
Warning: The water reservoir might need coating with something waterproof, such as epoxy. PLA generally leaks after a while. I also coated the water channels and the swimmer with epoxy.
The idea is that the reservoir holds a nutrient solution (look for hydroponic nutrients), which gets pumped up with a small waterpump. The nutrient solution then flows along the water channel. A plant holder on top places the roots of the plants in the water channel. For that, I wrap the stems of the plant in foam rubber, so that they sit firmly in the holes.
You can see the pump that I use in the pictures.
A video of the build is available here: https://youtu.be/2em0Q3HlyuI
Descripción original del autor, publicada en MyMiniFactory.
