New Enclosure of Flashforge AD5X
por PeterLu en Printables
The model is enclosure for AD5X, created by Flashforge, I made the DXF files depending on the printed parts.
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo sin pedir permiso ni dar crédito.
Al descargar aceptas respetar la licencia y dar crédito a PeterLu.
Archivos (30)
- A1.stl STL · 116 KB
- A2.stl STL · 180 KB
- A3.stl STL · 222 KB
- B1.stl STL · 98 KB
- B2.stl STL · 141 KB
- C3.stl STL · 164 KB
- A4.stl STL · 219 KB
- B4.stl STL · 199 KB
- C4.stl STL · 228 KB
- D4.stl STL · 223 KB
- 40mm taller_A4.stl STL · 311 KB
- 40mm taller_B4.stl STL · 269 KB
- 40mm taller_C4.stl STL · 316 KB
- 40mm taller_D4.stl STL · 293 KB
- D1.stl STL · 111 KB
- D3.stl STL · 225 KB
- B3.stl STL · 174 KB
- D2.stl STL · 203 KB
- C2.stl STL · 171 KB
- C1.stl STL · 120 KB
- E2.stl STL · 56 KB
- E5.stl STL · 27 KB
- E1.stl STL · 247 KB
- E6.stl STL · 158 KB
- E4.stl STL · 62 KB
- E3.stl STL · 4,0 MB
- Side plate_v2-2pcs.dxf DXF · 85 KB
- top perforated side plate-BodyPad.dxf DXF · 75 KB
- front door_v2.dxf DXF · 86 KB
- top cover_v2.dxf DXF · 80 KB
- Categoría
- Para tu impresora
- Formatos
- STL, DXF
- Descargas
- 7,520
- Publicado
Sobre este modelo
The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have to cut 3 pieces of 3mm panels with 273x180.5mm
Updated: 02/08/2025 made 40mm taller A4, B4,C4 and D4, so the ptfe tube won't hit the top cover.
You could buy the enclosure from Blurolls The printed parts must be printed by at least PETG, 15% infill, perimeter wall ≥3 I printed the parts using Filadock PETG, Here is the link: https://www.filadock.com/?ref=PETERLU
Descripción original del autor, publicada en Printables.
