NeeDoh Christmas Display Stand for 3 Boxes

I loved how NeeDohs were displayed in stores and wanted to bring that same look home, so I created this miniature Christmas display to hold three boxed NeeDohs. Inspired by the retail display, it features the pink brickwork, holiday stockings, wreath, and matching logo top. Fits: three upright boxes approximately 61 × 61 × 91 mm (2.4 × 2.4 × 3.6 in), side by side. Measure your own packaging before printing. Why this display? - No glue or hardware: the walls sit in tray channels; eight tabs locate the removable lid.

- Coordinated corners: distinct left/right brick offsets continue the front pattern.

- Height-based colors: black base, pink bricks and logos, green wreath and stockings, white details.

- Easy to load: the rear remains open.

What to print - 01 - Front Panel.stl — decorated front frame.

- 02 - Left Side Panel.stl — keep on the left when viewed from the front.

- 03 - Right Side Panel.stl — keep on the right.

- 04 - Channel Base Tray.stl — print all black.

- 05 - Logo Top Lid.stl — removable tab-and-pocket lid.

06 - Both Side Panels - Alternative.stl prints both side panels together. Use this OR the two individual side files, not both. Print settings & color changes P1S + AMS project: 07 - NeeDoh Christmas Display - P1S 0.4 AMS.3mf includes four arranged plates, fixed 0.20 mm layers, 3 walls, 15% infill, Generic PLA, and automatic layer-based filament changes. Target printer: Bambu Lab P1S with 0.4 mm nozzle and Textured PEI Plate. Assign black, pink, green, and white to filament slots 1–4 and confirm the AMS mapping before printing. Print each plate once; the two side panels share plate 2. Estimated total: about 6 h 45 min and 225 g, depending on filament and printer settings. Import at 100% scale in millimeters. Use fixed 0.20 mm layers, including the first layer. Suggested starting point: PLA, 0.4 mm nozzle, 3 walls, 15–20% infill. Check the fine logo and holly details in your slicer. Part Filament sequence Change BEFORE layer

Front Black → Pink → Green → White 16, 19, 22

Sides Black → Pink 16

Logo lid Black → Pink 37

Tray Black throughout None

Height check: front changes occur above Z=3.0, 3.6, and 4.2 mm; sides above Z=3.0 mm; lid above Z=7.2 mm. Always verify these heights in your own layer preview. Orientation: walls lie flat with artwork up; tray channels face up; lid pocket openings face the bed and logo faces up. Walls and tray need no supports in those orientations. The lid pocket roofs need about 3.4 mm bridges; inspect those layers before printing. Adaptive layers will change the listed layer numbers. Fit, size & assembly Overall assembled size is approximately 226.4 × 79.7 × 155.8 mm. Tray and lid each need a 226.4 × 79.7 mm footprint; a 45° rotation gives about 216.5 × 216.5 mm before brim. The front including tabs is 216 × 149 mm. Check your printer's usable area. The lower channels are 6 mm deep. Top tabs are 4 mm tall; pockets are 4.2 mm deep, with 0.2 mm nominal clearance per side. Seat all three walls fully in the tray, align the eight top tabs, then lower the lid evenly onto the wall shoulders. No adhesive is needed. This is a removable gravity-held fit: move the display by its tray. Prototype & image notes Digitally checked, not yet physically test-printed. Meshes and nominal joint clearances have been checked. Printer tolerances and warping affect the final sliding fit; dry-fit the pieces gently. The supplied P1S AMS project has been digitally sliced and checked, but has not been physically test-printed. Individual STL files are also included for other printers or manual filament changes. The cover and styled product scenes are AI-generated marketing visualizations, not real-print photos. The assembly and holly close-up images are CAD renders of the actual geometry. Toys and retail packaging shown for context are not included. Unofficial fan-made display; not affiliated with or endorsed by Schylling/NeeDoh. Brand names and logos belong to their respective owners.