NA Miata phone mount

Wanted a phone mount form my NA miata that was easily clean, easily removable, allowed for charging, and didn't block the air vents. Found the OFFROAM mounts and they seemed like good high quality solution only need to mount them. This uses the typically unused passenger foot-well light mounting position. This places the phone in an accessible and easily viewable location, while allowing the mount arm removed leaving only the mount ball for a minimal interior. The base plates are have a 20mm ball so any 20mm ball compatible system can be used instead Required parts: - Cover plate

- Nut plate

- (4) m3 nut

- (4) m3 x 18 screws

- OFFROAM base plate (2 or 4 hole)

- OFFROAM arm (regular is recommended, see photos for regular vs medium)

- OFFROAM phone holder

Install: - The factory cap plate can easily removed with trim removal tools or push out from reaching behind through the glove box

- Insert the nut plate through the hole or glovebox and align it with the opening

- While holding the nut plate, press the cover plate up to the opening, making sure the hole are aligned.

- While holding the two plate in place press the OFFROAM base up and align the hole to attach. You should be able to hold the whole thing together with one hand while installing the screws.

- Install all the screws

- Install OFFROAM arm

- Complete