Multiboard M18 Milwaukee Battery Holder
por Aviator4x4 en Thangs
Description:
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a Aviator4x4.
Archivos (1)
- Milwaukee_Batt_Holder_v0.STL STL · 1,1 MB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 268
- Publicado
Sobre este modelo
Description:
Multiboard holders for Milwaukee M18 batteries
Print Settings:
tl;dr: 3/3/3 | 30% Gyroid | Auto Tree supports | Auto Brim
Layers: 3 Walls/3 top layers/3 bottom layers Infil: 30% Gyroid Supports: Auto Tree Brim: w/ 0.1mm gap
Multiboard Interface:
You will need these to attach each battery holder to multiboard. I.E. if you are printing 4 of these, multiply (x) by 4.
Per Holder: (2) Heavy Weight-Bearing Hook Snap
https://than.gs/m/1130430
(2) Moderate Weight-Bearing Snap
https://than.gs/m/989145
(4) Small Thread - Multipoint
https://than.gs/m/1123334
This is my IP and commercial/for profit printing without my consent is not permitted.
Multiboard M18 Milwaukee Battery Holder © 2025 by Aviator4x4 is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/
Descripción original del autor, publicada en Thangs.
