MTB/road rear derailleur protector

Information: - This is a rear derailleur protector, it can either be used on MTB or road / gravel bikes. - It does provide slight aero benefits at higher speeds. - When used on full-suspension mountain bikes, I recommend using a lighter material with either 75% infill if you are running a downhill/enduro/trail or AM bike and using 50% infill on an XC bike. - Designed to fit mechanical/non T-Type SRAM derailleurs, should work with Shimano derailleurs however. - This should be able to fit to SRAM T-Type shifting systems. - It is unlikely to prevent the derailleur hanger from bending in a large crash, but it will prevent cosmetic damage to the derailleur. - Printing this in an infill BELOW 50% may cause the protector to deform or break on smaller impacts. - SECURE the item to the CHAINSTAY of your bike with three zip-ties. - If you have a full suspension bike that has a pivot below the axle that is fixed to the chainstay, the protector may collide into the derailleur when in lower gears.

Disclaimer: - I AM NOT RESPONSIBLE FOR ANY BENT DERAILLEUR HANGERS! THIS PROTECTOR WILL LIKELY NOT PROTECT AGAINST BENT DERAILLEUR HANGARS, ONLY COSMETIC DAMAGE. - Item is subject to the CC-BY-NC-SA licence.