Moving Box Stencils – FRAGILE, THIS SIDE UP, HEAVY + 2 (Free STL)

Five flat, reusable stencils for marking moving boxes, cartons, crates and shipping boxes. Spray paint, a stencil brush or a sponge all work. The middles of letters like A, R, D and P are held by thin bridges, so nothing falls out. Included: - FRAGILE: 180 x 45 mm

- THIS SIDE UP: 200 x 36 mm

- HEAVY: 140 x 43 mm

- KEEP DRY: 170 x 39 mm

- "This way up" arrows symbol (two arrows over a bar, the standard carton mark): 80 x 100 mm

All five fit a 200 x 200 mm bed. Each is a single flat 1.2 mm sheet with an 8 mm border and rounded corners. Print settings: PLA or PETG, 0.2 mm layers, 100% infill, no supports, flat on the bed as in the file. PLA gives the crispest edges, and PETG bends a little better over a bulging box. Tips: tape the stencil down or use low-tack spray glue, spray light coats from about 20 cm, and lift straight up. I made this with my free in-browser generator, 3D MakerBench. Need a different word, a room name for your moving boxes, another size or font, or your own logo? Make your own free at https://3dmakerbench.com/stencil-generator Renders shown; real print photos coming soon.