Moon Spellbook Storage Box with Sculpted Lid

A book-shaped keepsake box with a curved spine, sculpted page edges and a decorated cover. The crescent moon, stars, bats and curling vines are raised geometry. The removable cover reveals three compartments for jewelry, hair clips, notes or wrapped sweets. Included files Complete default-size STL and STEP files for all 2 printed parts are included here. Each STEP is the CAD-format alternative to the matching STL, not an additional part. Dimensions and fit Default assembled size: 146.95 x 190 x 52.13 mm (width x length x height). The inner opening is 123.4 x 176.4 mm before allowing for rounded corners and dividers. Divider height above the floor: 38.1 mm. Nominal lid clearance: 0.30 mm per side; locating rim depth: 4.5 mm. Size options Dimensions and storage layout can be customized here:

Available adjustments include overall book length, 1-4 compartments, divider height, the middle compartment proportion in the three-compartment layout, wall/base thickness and lid clearance. The cover and locating rim regenerate with the body. The files here are the complete default-size version. Custom exports follow the pricing shown on the model page. Preview and credits The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry. The illustrated colors require painting or slicer coloring; no AMS/MMU-ready multicolor 3MF is included. Created for boxesmodel with AI-assisted parametric CAD development.

© 2026 boxesmodel — CC BY-NC-ND 4.0. Personal noncommercial printing; attribution required; do not distribute modified versions. Printing and assembly Print one body.stl and one lid.stl. The cover lifts straight off; it is not hinged. Remove supports from the locating rim, then lower the cover vertically onto the body. No screws, magnets or other hardware are needed. Check fit before applying force. The body rests on its bottom; review the decorated lid and underside rim separately for orientation and supports.

Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and fit in your slicer. No tested print profile, G-code, print time or material consumption is supplied.

Dimensions are in millimetres. Print one of each STL part; STEP files are optional CAD alternatives.

Food-contact performance has not been validated; use individually wrapped sweets if storing treats.