Moon Lamp
por Kx en Printables
Moon Lithophane Lamp for desks, nightstands, shelfs, etc.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Kx.
Archivos (16)
- moon_lamp_200mm.3mf 3MF · 72,7 MB
- moon_lamp_175mm.3mf 3MF · 60,7 MB
- moon_lamp_140mm.3mf 3MF · 68,1 MB
- base.3mf 3MF · 1,1 MB
- strain_relief.3mf 3MF · 327 KB
- moon_lamp_140mm.stl STL · 227,4 MB
- moon_lamp_175mm.stl STL · 236,0 MB
- moon_lamp_200mm.stl STL · 239,9 MB
- base.stl STL · 4,9 MB
- strain_relief.stl STL · 1,0 MB
- base.step STEP · 1,9 MB
- strainRelief.step STEP · 221 KB
- moon_lamp_175mm_0.2mm_PLA_MINI_1d16h45m.gcode GCODE · 212,7 MB
- moon_lamp_140mm_0.2mm_PLA_MINI_1d5h34m.gcode GCODE · 156,7 MB
- base_0.2mm_PLA_MINI_3h58m.gcode GCODE · 9,1 MB
- strain_relief_0.15mm_PLA_MINI_23m.gcode GCODE · 1,0 MB
- Categoría
- Hogar
- Formatos
- 3MF, STL, STEP, GCODE
- Descargas
- 11,962
- Publicado
Sobre este modelo
hanging Moon Lamp variant
Moon Globe 3 sizes available: Ø 140mm / Ø 175mm / Ø 200mm (Ø200mm version is not printable on the MINI) Hole for light bulb, diameter: 60 mm Print instructions Infill: 100 % (The 3D model is a hollow object, infill 100% means print a solid shell) Layer: 0,2 mm Supports: No Base for E27 Light bulbs Print instructions Infill: 5% - 10% Layer: 0,2 mm Supports: No The print must be paused twice to insert the M3 Nuts (check Photos). First pause after 5mm, second pause after 7,6mm. The pause is already setup in the 3mf and gcode files. Strain Relief Print instructions Infill: 20% Honey Comb Layer: 0,15 mm Supports: No Additional required parts: 4x M3 Nut 4x M3x12 Screw 1x E27 Ceramic Socket Bulb Holder, something like this 1x Power Cord, something like this or that
The picture is taken with a warm white light bulb, for a picture with a cold white light bulb please check the hanging Moon Lamp variant
Credit for the Moon Lithophane goes to u/moononournation: https://www.thingiverse.com/thing:4102658/files Progressive Detail Moon Lamp : 23 Steps (with Pictures) - Instructables
Descripción original del autor, publicada en Printables.
